Ask a Member

1) Power up the engraver

Turn the machine on and connect it to your computer with USB first. This lets you configure the wireless settings.

2) Connect with control software

Open your engraving software:

• LightBurn (most common)
• or LaserGRBL

Add or connect to the machine via USB.

3) Open device network settings

Inside the software:

• Go to Device Settings or Console
• Look for Wi-Fi / Network configuration or controller settings.

(Some controllers show commands in the console.)

4) Enter Wi-Fi details

Input:

• Your Wi-Fi network name (SSID)
• Your Wi-Fi password

Send or save settings.

5) Reboot the engraver

Turn the machine off, wait 10 seconds, then power back on.

6) Connect wirelessly

Now:

• Disconnect USB
• Add device again in LightBurn via Network/Wi-Fi
• Select the machine’s IP address